How to use fire hose correctly?

How to use fire hose correctly1
How can the fire hose be used to extinguish the fire quickly?Today, the manufacturer of fire hose is going to tell you about the specific use details. There are 12 steps for the main details, which may seem tedious, but the fire hazard is huge. We should pay attention to these details and put out the fire as soon as possible.

1, open the fire bolt door, take out the hose, water gun.

2. Carefully check whether the hose and joint are in good condition. If damaged, it is strictly prohibited to use.

3, to the direction of the fire laying water belt, to prevent twisting.

4. Connect the hose close to the end of the fire hydrant with the fire hydrant. Insert the connection buckle into the chute and tighten it clockwise when connecting.

5. Connect the other end of the hose with the water gun (the connection procedure is the same as that of the fire hydrant).

6, after the end of the connection, at least two people hold the water gun, aim at the fire (not to people, to avoid high-pressure water injury).

7, slowly open the fire hydrant valve to the largest, aiming at the root of the fire stop extinguishing.

Post time: Jun-20-2022

Send your message to us:

Write your message here and send it to us